Guelph Forklift Training Programs

Guelph Forklift Training Programs - Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training provides instruction in types of forklifts, pre-shift check, fuel kinds and dealing with fuels, and safe utilization of a lift truck. Practical, hands-on training helps those participating in obtaining fundamental operational skills. Course content comprises existing regulations governing the operation of forklifts. Our proven forklift courses are meant to provide training on these types of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Handle Loads Safely

When the forklift is in operation, do not lower or raise the forks. Loads should not extend above the backrest. This is due to the risk of the load sliding back towards the operator. Check for overhead obstacles and make certain there is enough clearance prior to lifting a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it back slightly.

The lift truck is less stable when a load is in a raised position. Make certain that no one ever walks beneath the elevated fork. The operator should never leave the forklift when the load is raised.

The forks should be level when handling pallets, and high enough to extend all the way into and below the load. The fork's width must provide equal weight distribution.

Before unloading or loading the truck, set the brakes and chock the wheels. Floors should be strong enough to support the weight of the load and the forklift combined. Fixed jacks could be installed to be able to support a semi-trailer which is not coupled to a tractor. The entrance door height should clear the forklift height by a minimum of 5 cm. Edges of rail cars, ramps and docks should be marked and avoid them.

If there is not proper ventilation into the forklift, do not stay in there for long periods. The interior of the truck should have enough lighting and be obstruction free. Check the flooring of the forklift cab for holes. The installation of material that are non-slip on the floor will help avoid slipping. Clear any obstacles from dockplates and docks and ensure surfaces are not oily or wet.

Never tow or push other vehicles using a lift truck.

Click to Download the pdf